HOW TO CLEAN YOUR CONCRETE MIXER EASILY?

In order to get the best performance from your cement mixer it is important to take certain care in the maintenance and use of it, in addition, doing it in a timely manner can save you time and money.

If you want to ensure the durability of the pot, forget to use dangerous corrosive substances or hit the drum with a chisel, as you could cause permanent damage to your mixer.

There is a much easier and faster way to do it with the help of water and gravel. Below, we give you a series of points that you must carry out so that your mixer is free of concrete residues and ready for your next construction project.

PREVENTION MEASURES

To ensure your safety and that of your equipment, it is important to follow these measures before starting, first check that the mixer is switched off and placed in a stable place to prevent sudden movements.


CLEANING

1. Proceed with the mixing with which your mixer will be cleaned,

Add two cans of clean gravel into the pot and 3 gallons of water.

2. Adjust the angle of the pot

In this way, the mixture will remain to the edge and thus guarantee its complete cleaning.

3. Turn on your mixer

The mixture of water and gravel must be in continuous motion for 10 to 12 minutes.


4. Empty the contents inside a wheelbarrow and throw it away

Make sure it is in a safe place to avoid contamination or damage.


5. Finally sprinkle water with a hose and let the container dry in the open air.



RECOMMENDATIONS

The ideal is to clean it almost after use, as this will avoid the hardening of the concrete which would involve making a double effort to clean it.